[j-nsp] EOMPLS between 10G subinterface and GE subinterface between two 7600 with Juniper MX480 as CE1

[Mark Tinka]

On Saturday 20 February 2010 12:45:17 am Ioan Branet wrote:

> There is no problem with IOS because on another 7609 with
>  same IOS  the EOMPLS  circuit works the only difference
>  is that on the 7609 on which the EOMPLS won't works is
>  that i have redundant processors and the following
>  module:

I can't co-relate having redundant supervisor modules with 
the inability of the EoMPLS pw to come up. Have you tried 
disabling the second supervisor module, just in case you 
suspect it's an issue?

Otherwise, your line card compliment appears to be the same 
on both platforms, except that they are installed in 
separate slots (not that that should be important).

Cheers,

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20100220/84e3011e/attachment.bin>