[j-nsp] show route advertising-protocol on IPv6 peers

[Daniel Verlouw]

On Wed, 2009-12-16 at 16:39 +0100, Daniel Verlouw wrote:
> It's most obvious with IPv6 neighbors receiving a full feed (+/- 2400
> prefixes) from us, whereas the same command with an IPv4 neighbor
> receiving a full feed (>300k prefixes) is almost instantaneous.

funny enough, I just ran into the same issue with an IPv4 peer receiving
only a single default route from us. Still working with JTAC, but so far
nothing useful..

   --Daniel.