[j-nsp] upgrading M120 directly from 8.5 to 9.3

[Doug McPherson]

On Mon, Jan 11, 2010 at 4:05 PM, Jared Mauch <jared at puck.nether.net> wrote:
>
...
> 1) Check that your OOB works
> 2) Test in lab [if possible]
> 3) Load the code on local media (including all relevant jinstall images, including current one if you need to back-out for some unforseen reason).
> 4) (Some people may not like this, but ...) try jumping to the release you want directly with the jinstall.  Here's where #1 is *MOST* important!!!!


and:

5) double check that you have your pre-upgrade config saved *off* the
router and available.


/doug

-- 
Doug McPherson