[j-nsp] Input rate limiting on MX240

[Cyrill Malevanov]

On Jan 25, 2010, at 5:12 AM, David Coulson wrote:

> I am trying to configure input rate limiting on an ae0 unit on a MX240 unning 9.4R2.9... Everything I have tried so far has had no effect on interface input rates.
> 
> * policier with firewall filter applied to interface
> * input-traffic-control-profile with a shaping-rate on the interface/unit within class-of-service)
> 

What line cards do you have in your MX router?
I think you should use -Q- or MPC- cards to perform rate-limiting on units or subinterfaces on MX routers.

Cyrill