[j-nsp] Input rate limiting on MX240
Richard A Steenbergen
ras at e-gerbil.net
Tue Jan 26 04:32:24 EST 2010
On Tue, Jan 26, 2010 at 11:35:48AM +0300, Cyrill Malevanov wrote:
> On Jan 25, 2010, at 5:12 AM, David Coulson wrote:
> > I am trying to configure input rate limiting on an ae0 unit on a MX240 unning 9.4R2.9... Everything I have tried so far has had no effect on interface input rates.
> > * policier with firewall filter applied to interface
> > * input-traffic-control-profile with a shaping-rate on the interface/unit within class-of-service)
> What line cards do you have in your MX router?
> I think you should use -Q- or MPC- cards to perform rate-limiting on
> units or subinterfaces on MX routers.
You don't need -Q cards to do per-subinterface policing, just cos AFAIK.
Richard A Steenbergen <ras at e-gerbil.net> http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
More information about the juniper-nsp