[j-nsp] M7i crash with strage log entry

[Thomas Eichhorn]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

the disabling of the hard drive did not change the behaviour,
so I would like trying to disable adaptive standby - but I can't find
it anywhere in the manual... Is this a hidden knob somebody could point me to?

Thanks
Tom

Am 30.06.2010 12:57, schrieb Thomas Eichhorn:
> If you could give me a hint where to find it I would be really glad!
> 
> Tom
> 
> Am 30.06.2010 12:43, schrieb Jared Mauch:
>> Have you disabled adaptive standby? I can look up the configuration in a few if you don't have it.
>>
>> Sent from my iThing
>>
>> On Jun 30, 2010, at 5:46 AM, Thomas Eichhorn <te at te3networks.de> wrote:
>>
>>> Thanks for all your help,
>>> I cannot simply remove the disk nor the cf card,
>>> the box is to far away.
>>>
>>> I now tried to remove the disk from the boot list,
>>> so it does not get initialized and the box completely runs
>>> from CF - If that doesn't work I will try the other way (disabling
>>> cf and enabling disk).
>>>
>>> If this works I will give feedback here so that people also
>>> running into that problem will find it.
>>>
>>> Tom
>>>
>>> Am 30.06.2010 10:51, schrieb Marcin Kucharczyk:
>>>> On Wednesday 30 of June 2010 10:10:24 Akhmedd Aly wrote:
>>>>> Hi Marcin,
>>>>>
>>>>> we have the same problems with M7Is in the may:
>>>>> *M7i> panic: ad_ioctl:1275539168: ad1: Standby not armed but state is in
>>>>> valid: state="ARMED"*
>>>>>
>>>>> And all of this problems come after installing (we never did not use
>>>>> internal CF in its before) Compact Flash 1GB (not from official Juniper
>>>>> upgrade kit), its also rebooted every 3-4 hours with the same PANIC
>>>>> message.
>>>>>
>>>>> After removing CFs we do not have this problems. So I think that it was not
>>>>> problems with internal disks...
>>>>>
>>>>
>>>> Hi,
>>>>
>>>> our router had rebooted every 4 hours and 21 minutes (exactly). As I wrote to 
>>>> Thomas we had removed HDD, and now router runs on CF only. Our CF isn't from 
>>>> official Juniper upgrade kit, it's regular Kingston Standard 4GB CF Type 1.
>>>>
>>>> It's a pity that CF and HDD can't run together.
>>>>
>>>> Regards, 
>>>> Marcin
>>>>
>>>>>
>>>>>
>>>>> 2010/6/22 Marcin Kucharczyk <m.kucharczyk at net.icm.edu.pl>
>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> tonight one of ours M7i crashed with strange log entry:
>>>>>>
>>>>>> savecore: reboot after panic: ad_ioctl:1277186066: ad1: Standby not armed
>>>>>> but
>>>>>> state is invalid: state="ARMED"
>>>>>>
>>>>>> Disk was replaced 2 weeks ago. Yesterday we inserted new compact flash
>>>>>> card (there wasn't any before). We upgraded Junos to 10.0R3.10 also. Do
>>>>>> you have any idea what could happened?
>>>>>>
>>>>>> Regards,
>>>>>> Marcin Kucharczyk
>>>> _______________________________________________
>>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkwsPNwACgkQrUvjMoak8Zd5cgCdHwUD5c8kvjCZ/vt8giRjZoSW
Lm4AnR5mvVIHS7pMbKvclh/r4TFrOMIo
=Y3kW
-----END PGP SIGNATURE-----