[j-nsp] dropped packet counter and stat of traffic policer

[Samit]

Hi,

I am testing the rate limiting in junos 9.2, M7i series. Everything is
working as expected but, I could not find and figure out the command
which can show the statistics specially the dropped/discard packets
counter by the traffic police rules. Any tips would be appreciated.

samit at gw-router# show
term test-limit-prefix {
    from {
        destination-address {
            0.0.0.0/0;
        }
    }
    then {
        policer test-police;
        count test-count;
        accept;
    }
}

[edit firewall filter test-traffic-limit]

samit at gw-router#

samit at gw-router# show firewall policer test-police
if-exceeding {
    bandwidth-limit 256k;
    burst-size-limit 16k;
}
then discard;

[edit]


samit at gw-router> show policer ?
Possible completions:
  <[Enter]>            Execute this command
  <policer>            Policer name
  __auto_policer_template_1__
  __auto_policer_template_2__
  __auto_policer_template_3__
  __auto_policer_template_4__
  __auto_policer_template__
  __default_arp_policer__
  |                    Pipe through a command
samit at gw-router> show policer


samit at gw-router> show firewall filter test-traffic-limit

Filter: test-traffic-limit
Counters:
Name                                                Bytes
Packets
test-count                                173823870          4588919
Policers:
Name                                              Packets
test-police-test-limit-prefix                  290558

samit at gw-router>


samit at gw-router# show interfaces ge-0/0/0
description "sw-test Gi0/1";
vlan-tagging;
unit 0 {
    vlan-id 12;
    family inet {
        filter {
            output test-traffic-limit;
        }
        address 192.168.0.1/24;
    }
}