[j-nsp] mlfr

Jim Lucas lists at cmsws.com
Thu Jul 8 20:04:45 EDT 2010


Nilesh Khambal wrote:
> I think Multilink PIC does not support FRF.16 configuration ( mlfr-uni-nni
> bundle or multiple DLCIs in a single bundle). You will need LS PIC or AS/AS2
> PIC (with Layer-2 package) to do that. If you need it only for Layer2
> purpose you can also go for AS-2 Layer 2 Services only PIC.

So, you are saying that since this is an M20 I cannot do this in software, that
I must have a physical device (equivalent to the multilink in fpc 2 pic 0) to
perform the service of the FRF.16?

Thanks for the information.

> 
> The current ML PIC in your router will only support FRF.15 (One DLCI per
> Bundle).
> 
> Thanks,
> Nilesh
> 


-- 
Jim Lucas

A: Maybe because some people are too annoyed by top-posting.
Q: Why do I not get an answer to my question(s)?
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?


More information about the juniper-nsp mailing list