[j-nsp] Juniper RANCID

[Dale Shaw]

Hi Stefan,

On Fri, Jul 16, 2010 at 9:53 AM, Stefan Schlesinger <sts at ono.at> wrote:
>
> I'm trying to get RANCID to work with jlogin on my SRX100. [...]
>
> The following happens when i run the command line from above:
>
> $ bin/jlogin -f .cloginrc 192.168.0.13
>        spawn ssh -c 3des -x -l rancid 192.168.0.13
>        rancid at 192.168.0.13's password:
>        --- JUNOS 10.1R3.7 built 2010-07-10 08:32:02 UTC
>        rancid at juniper-01>

Looks like 'jlogin' is working just fine. 'jlogin' automates logins
and (optionally) allows you to execute commands (using -c or -x).
'jrancid' does the work to collect and store command output in CVS,
but typically it is not executed directly.

Have you run rancid-cvs and then rancid-run? Have you set up rancid.conf?

Follow some of the links from: http://www.shrubbery.net/rancid/#started

cheers,
Dale