[j-nsp] SRX CPU utilization reaches 100%

[Stefan Fouant]

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of Fahad Khan
> Sent: Friday, July 16, 2010 7:52 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] SRX CPU utilization reaches 100%
> 
> I faced that SRX CPU utilization reaches to 100% suddenly after
configuring
> three policies with address groups of 90 addresses. And then the telnet
> session was also broken for 2 mins approx but resume after that time.
> 
> has any body experienced this? I am using junos 10.0R3.10 (recommended
> version)

Does the CPU remain at 100%, or just for two minutes and then fall to a more
acceptable level?  Is this an SRX 100 by any chance?

Stefan Fouant, CISSP, JNCIEx2
www.shortestpathfirst.net
GPG Key ID: 0xB5E3803D