[j-nsp] SRX CPU utilization reaches 100%

[Fahad Khan]

Yes, it came back to normal with in this time and this is SRX3600 in chassis
cluster.

regards,

Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global Technology Services, IBM
fahad at pk.ibm.com
+92-301-8247638
Skype: fahad-ibm
http://www.linkedin.com/in/muhammadfahadkhan



On Fri, Jul 16, 2010 at 5:44 PM, Stefan Fouant <
sfouant at shortestpathfirst.net> wrote:

> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> > bounces at puck.nether.net] On Behalf Of Fahad Khan
> > Sent: Friday, July 16, 2010 7:52 AM
> > To: juniper-nsp at puck.nether.net
> > Subject: [j-nsp] SRX CPU utilization reaches 100%
> >
> > I faced that SRX CPU utilization reaches to 100% suddenly after
> configuring
> > three policies with address groups of 90 addresses. And then the telnet
> > session was also broken for 2 mins approx but resume after that time.
> >
> > has any body experienced this? I am using junos 10.0R3.10 (recommended
> > version)
>
> Does the CPU remain at 100%, or just for two minutes and then fall to a
> more
> acceptable level?  Is this an SRX 100 by any chance?
>
> Stefan Fouant, CISSP, JNCIEx2
> www.shortestpathfirst.net
> GPG Key ID: 0xB5E3803D
>
>