[j-nsp] LS to LSQ Interfaces

[Jonathan Looney]

In configuration mode, type 'replace pattern ls- with lsq-'.  That should
replace any occurence of ls- with lsq-. You should probably also run "show |
compare" afterward to ensure that this made the expected changes.

-Jon

On Fri, Jul 30, 2010 at 10:48 AM, Brad Fleming <bdflemin at gmail.com> wrote:

> When upgrading JunosES software from 9.6 to 10.0R3 the ls-0/0/# interface
> needs to be changed to lsq-0/0/#. This needs to happen on the actual
> interface on any physical interfaces in the bundle. Does anyone know of a
> graceful way to perform this task? Does anyone know why Juniper decided to
> change the name of the interface (certainly makes no sense to me)?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>