[j-nsp] LS to LSQ Interfaces

[Brad Fleming]

Unfortunately we access these devices over the MLPPP bundle. So the  
bundle needs to be up for us to issue that command or the upgrade /  
reboot command.

Is there a way to make this part of a one-time start up script though?  
Like something Junos could automatically do with the config after the  
update has been applied and the box rebooted?


On Jul 30, 2010, at 10:19 AM, Jonathan Looney wrote:

> In configuration mode, type 'replace pattern ls- with lsq-'.  That  
> should replace any occurence of ls- with lsq-. You should probably  
> also run "show | compare" afterward to ensure that this made the  
> expected changes.
>
> -Jon
>
> On Fri, Jul 30, 2010 at 10:48 AM, Brad Fleming <bdflemin at gmail.com>  
> wrote:
> When upgrading JunosES software from 9.6 to 10.0R3 the ls-0/0/#  
> interface needs to be changed to lsq-0/0/#. This needs to happen on  
> the actual interface on any physical interfaces in the bundle. Does  
> anyone know of a graceful way to perform this task? Does anyone know  
> why Juniper decided to change the name of the interface (certainly  
> makes no sense to me)?