[j-nsp] Question about ISO and ISIS family

[Ramanathan Sethuraman]

J series support CLNS routing.Check out this link...

http://www.juniper.net/techpubs/en_US/junos10.1/topics/usage-guidelines/routing-configuring-clns-for-is-is.html

Thanks
Sethu



-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of luis barrios
Sent: Friday, July 30, 2010 10:16 AM
To: Felix Schueren; Lista-Juniper
Subject: Re: [j-nsp] Question about ISO and ISIS family

Thanks...
I need to manipulate ISO routes , and export the ISO routes in the iso.0
table to another router via ISIS.

I think it can not be posible with juniper boxes ( im not sure if the J
series do it ) .

thanks ..


2010/7/28 Felix Schueren <felix.schueren at hosteurope.de>

> Luis,
>
>
>  Hello ..
>> I´m working with isis using iso addressing, so now when i see the routes
>> in
>> my EX  , it has the next:
>> juniper at junex.cvie.mgmt.01# run show route
>>
>> inet.0: 13 destinations, 13 routes (13 active, 0 holddown, 0 hidden)
>> + = Active Route, - = Last Active, * = Both
>> .......................
>> .......................
>> .......................
>>
>>                      MultiRecv
>>
>> iso.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
>> + = Active Route, - = Last Active, * = Both
>>
>> 49.77ff.0021.59cf.ebf0/72
>>                   *[Direct/0] 03:11:44
>>                    > via lo0.0
>> 49.77ff.0021.59cf.ebf1/72
>>                   *[Direct/0] 02:46:39
>>                    > via lo0.0
>>
>>
>> so, my question is, how can i export via ISIS ( the adjacencies to the
>> other
>> equipments are UP)  the  routes in the iso.0 table ?
>>
>>
> I don't quite understand what you are trying to do? Export to where?
>
> In any case:
> - Junos can only propagate ip(4 + 6) routes via IS-IS, you cannot use run
> an ISO addressing network with Juniper boxes
> - the ISO addressing is just for link-local communications so IS-IS works
> - iso.0 routes are local and cannot be exported in any way
>
> By default, any IP routes which are associated with IS-IS-speaking
> interfaces will be in the IS-IS database (and propagated throughout the
> IS-IS network).
>
> kind regards,
>
> Felix
>
> --
> Felix Schüren
> Head of Network
>
> -----------------------------------------------------------------------
> Host Europe GmbH - http://www.hosteurope.de
> Welserstraße 14 - 51149 Köln - Germany
> Telefon: 0800 467 8387 - Fax: +49 180 5 66 3233 (*)
> HRB 28495 Amtsgericht Köln - USt-IdNr.: DE187370678
> Geschäftsführer:
> Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller
>
> (*) 0,14 EUR/Min. aus dem dt. Festnetz; maximal 0,42 EUR/Min. aus
> den dt. Mobilfunknetzen
>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp