[j-nsp] Full table inside VRF - J Series

[Truman Boyes]

Yes you can do this on a J-series. If you can handle the full table in inet.0, you can handle this full table in a VRF. Just make sure you have enough RAM to hold a full table (regardless of the type of routing-instance) ... 

Truman


On 20/06/2010, at 4:53 PM, Rolf Mendelsohn wrote:

> Hi All,
> 
> Note that my J experience is limited, I've mainly been exposed to lots of C 
> over the years... :>).
> 
> We are looking to try and squeeze a Full table into a vrf on the J Series.
> 
> Is this possible, or is the only bet to go for an M Series or C7200/NPE-G1 or 
> 2?
> 
> cheers
> /rolf
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>