[j-nsp] M7i crash with strage log entry

Marcin Kucharczyk m.kucharczyk at net.icm.edu.pl
Wed Jun 30 04:51:06 EDT 2010


On Wednesday 30 of June 2010 10:10:24 Akhmedd Aly wrote:
> Hi Marcin,
> 
> we have the same problems with M7Is in the may:
>  *M7i> panic: ad_ioctl:1275539168: ad1: Standby not armed but state is in
> valid: state="ARMED"*
> 
> And all of this problems come after installing (we never did not use
> internal CF in its before) Compact Flash 1GB (not from official Juniper
> upgrade kit), its also rebooted every 3-4 hours with the same PANIC
> message.
> 
> After removing CFs we do not have this problems. So I think that it was not
> problems with internal disks...
> 

Hi,

our router had rebooted every 4 hours and 21 minutes (exactly). As I wrote to 
Thomas we had removed HDD, and now router runs on CF only. Our CF isn't from 
official Juniper upgrade kit, it's regular Kingston Standard 4GB CF Type 1.

It's a pity that CF and HDD can't run together.

Regards, 
Marcin

> 
> 
> 2010/6/22 Marcin Kucharczyk <m.kucharczyk at net.icm.edu.pl>
> 
> > Hello,
> > 
> > tonight one of ours M7i crashed with strange log entry:
> > 
> > savecore: reboot after panic: ad_ioctl:1277186066: ad1: Standby not armed
> > but
> > state is invalid: state="ARMED"
> > 
> > Disk was replaced 2 weeks ago. Yesterday we inserted new compact flash
> > card (there wasn't any before). We upgraded Junos to 10.0R3.10 also. Do
> > you have any idea what could happened?
> > 
> > Regards,
> > Marcin Kucharczyk


More information about the juniper-nsp mailing list