[j-nsp] M7i crash with strage log entry
Jared Mauch
jared at puck.nether.net
Wed Jun 30 06:43:32 EDT 2010
Have you disabled adaptive standby? I can look up the configuration in a few if you don't have it.
Sent from my iThing
On Jun 30, 2010, at 5:46 AM, Thomas Eichhorn <te at te3networks.de> wrote:
> Thanks for all your help,
> I cannot simply remove the disk nor the cf card,
> the box is to far away.
>
> I now tried to remove the disk from the boot list,
> so it does not get initialized and the box completely runs
> from CF - If that doesn't work I will try the other way (disabling
> cf and enabling disk).
>
> If this works I will give feedback here so that people also
> running into that problem will find it.
>
> Tom
>
> Am 30.06.2010 10:51, schrieb Marcin Kucharczyk:
>> On Wednesday 30 of June 2010 10:10:24 Akhmedd Aly wrote:
>>> Hi Marcin,
>>>
>>> we have the same problems with M7Is in the may:
>>> *M7i> panic: ad_ioctl:1275539168: ad1: Standby not armed but state is in
>>> valid: state="ARMED"*
>>>
>>> And all of this problems come after installing (we never did not use
>>> internal CF in its before) Compact Flash 1GB (not from official Juniper
>>> upgrade kit), its also rebooted every 3-4 hours with the same PANIC
>>> message.
>>>
>>> After removing CFs we do not have this problems. So I think that it was not
>>> problems with internal disks...
>>>
>>
>> Hi,
>>
>> our router had rebooted every 4 hours and 21 minutes (exactly). As I wrote to
>> Thomas we had removed HDD, and now router runs on CF only. Our CF isn't from
>> official Juniper upgrade kit, it's regular Kingston Standard 4GB CF Type 1.
>>
>> It's a pity that CF and HDD can't run together.
>>
>> Regards,
>> Marcin
>>
>>>
>>>
>>> 2010/6/22 Marcin Kucharczyk <m.kucharczyk at net.icm.edu.pl>
>>>
>>>> Hello,
>>>>
>>>> tonight one of ours M7i crashed with strange log entry:
>>>>
>>>> savecore: reboot after panic: ad_ioctl:1277186066: ad1: Standby not armed
>>>> but
>>>> state is invalid: state="ARMED"
>>>>
>>>> Disk was replaced 2 weeks ago. Yesterday we inserted new compact flash
>>>> card (there wasn't any before). We upgraded Junos to 10.0R3.10 also. Do
>>>> you have any idea what could happened?
>>>>
>>>> Regards,
>>>> Marcin Kucharczyk
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list