[j-nsp] M7i crash with strage log entry

[Thomas Eichhorn]

If you could give me a hint where to find it I would be really glad!

Tom

Am 30.06.2010 12:43, schrieb Jared Mauch:
> Have you disabled adaptive standby? I can look up the configuration in a few if you don't have it.
> 
> Sent from my iThing
> 
> On Jun 30, 2010, at 5:46 AM, Thomas Eichhorn <te at te3networks.de> wrote:
> 
>> Thanks for all your help,
>> I cannot simply remove the disk nor the cf card,
>> the box is to far away.
>>
>> I now tried to remove the disk from the boot list,
>> so it does not get initialized and the box completely runs
>> from CF - If that doesn't work I will try the other way (disabling
>> cf and enabling disk).
>>
>> If this works I will give feedback here so that people also
>> running into that problem will find it.
>>
>> Tom
>>
>> Am 30.06.2010 10:51, schrieb Marcin Kucharczyk:
>>> On Wednesday 30 of June 2010 10:10:24 Akhmedd Aly wrote:
>>>> Hi Marcin,
>>>>
>>>> we have the same problems with M7Is in the may:
>>>> *M7i> panic: ad_ioctl:1275539168: ad1: Standby not armed but state is in
>>>> valid: state="ARMED"*
>>>>
>>>> And all of this problems come after installing (we never did not use
>>>> internal CF in its before) Compact Flash 1GB (not from official Juniper
>>>> upgrade kit), its also rebooted every 3-4 hours with the same PANIC
>>>> message.
>>>>
>>>> After removing CFs we do not have this problems. So I think that it was not
>>>> problems with internal disks...
>>>>
>>>
>>> Hi,
>>>
>>> our router had rebooted every 4 hours and 21 minutes (exactly). As I wrote to 
>>> Thomas we had removed HDD, and now router runs on CF only. Our CF isn't from 
>>> official Juniper upgrade kit, it's regular Kingston Standard 4GB CF Type 1.
>>>
>>> It's a pity that CF and HDD can't run together.
>>>
>>> Regards, 
>>> Marcin
>>>
>>>>
>>>>
>>>> 2010/6/22 Marcin Kucharczyk <m.kucharczyk at net.icm.edu.pl>
>>>>
>>>>> Hello,
>>>>>
>>>>> tonight one of ours M7i crashed with strange log entry:
>>>>>
>>>>> savecore: reboot after panic: ad_ioctl:1277186066: ad1: Standby not armed
>>>>> but
>>>>> state is invalid: state="ARMED"
>>>>>
>>>>> Disk was replaced 2 weeks ago. Yesterday we inserted new compact flash
>>>>> card (there wasn't any before). We upgraded Junos to 10.0R3.10 also. Do
>>>>> you have any idea what could happened?
>>>>>
>>>>> Regards,
>>>>> Marcin Kucharczyk
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp