[j-nsp] Sampling Traffic Problem--- Urgent

[Felix Schueren]

Uttam,

> On juniper M10i with JUNOS 9.2, we have flow exported by the routing engine
> sampling packets headers and had aggregated them into flows.We have two
> upstream and peered number of customers, we have packet sampling done by
> defining a firewall filter to accept and sample all traffic and that rule
> has been applied to the provider facing interfaces.
> 
please paste your current "forwarding-options sampling" configuration.

> In our case, when we had two upstream previously and sampled, it was quite
> related to the flow extracted but recently we get peered with another
> upstream and did the same configuration for sampling but we are not getting
> the exact flow , we are getting it decreased by half. What can be the reason
> behind this?
it could be that you're hitting the built-in rate limit for sampling, or 
maybe your firewall filters aren't working right, or your multipathing 
isn't what you'd want it to be. Do you have an advanced services pic / 
MS-PIC in the m10i? If in doubt, paste a  "show chassis hardware 
clei-models" (clei-models to easily obscure the serial numbers).

Kind regards,

Felix

-- 
Felix Schüren
Head of Network

-----------------------------------------------------------------------
Host Europe GmbH - http://www.hosteurope.de
Welserstraße 14 - 51149 Köln - Germany
Telefon: 0800 467 8387 - Fax: +49 180 5 66 3233 (*)
HRB 28495 Amtsgericht Köln - USt-IdNr.: DE187370678
Geschäftsführer:
Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller

(*) 0,14 EUR/Min. aus dem dt. Festnetz, Mobilfunkpreise ggf. abweichend