[j-nsp] VPLS clients Inaccessible

[Fahad Aqeel]

Hi Experts

I have One MX480 and Two MX240 routers connected with each others. Running VPLS and L3 services b/w them.
In MX480 2 (1Gbps) port connect with server machine configure as vpls access port.
In Mx240 1 (1Gbps) port connect with Cisco switch configure as vpls Trunk port.

The issue is i m not able to ping from server to vlan on cisco switch,but
when i change MX240 port as access port same as cisco switch it can accessible.
What i observe problem is in trunk port may be. 

- vpls nodes show UP.
- Mac address of clients show in vpls mac-table.

My configs.

MX480:-

 ge-1/1/3 {
        encapsulation ethernet-vpls;
        unit 0 {
            family vpls;
        }
    }


Local site: AccessZTE1 (1)
    connection-site           Type  St     Time last up          # Up trans
    3                         rmt   Up     Mar  4 04:45:39 2010           1
      Remote PE: 192.168.3.3, Negotiated control-word: No
      Incoming label: 262163, Outgoing label: 262201
      Local interface: lsi.1050624, Status: Up, Encapsulation: VPLS
        Description: Intf - vpls VPLS local site 1 remote site 3


MAC flags (S -static MAC, D -dynamic MAC,
           SE -Statistics enabled, NM -Non configured MAC)
Routing instance : VPLS
 Bridging domain : __VPLS__, VLAN : NA
   MAC                 MAC      Logical
   address             flags    interface 
   00:19:c6:1c:9f:00   D        ge-1/1/5.0           
   00:1f:16:2c:de:4f   D        ge-1/1/3.0           
   00:d0:d0:a1:2e:92   D        ge-1/1/2.0           
   00:d0:d0:a1:71:b0   D        ge-1/1/4.0           
   64:16:8d:f6:f9:15   D        lsi.1050624      



MX240:-    

    ge-1/1/0 {
        vlan-tagging;
        encapsulation flexible-ethernet-services;
        unit 1 {
            encapsulation vlan-vpls;
            vlan-id 1;
            input-vlan-map pop;
            output-vlan-map push;
            family vpls;
        }
        unit 2 {
            encapsulation vlan-vpls;
            vlan-id 2;
            input-vlan-map pop;
            output-vlan-map push;
            family vpls;
        }
    }


Instance: VPLS
  Local site: AccessZTE1 (3)
    connection-site           Type  St     Time last up          # Up trans
    1                         rmt   Up     Mar  4 04:44:34 2010           1
      Remote PE: 192.168.1.1, Negotiated control-word: No
      Incoming label: 262201, Outgoing label: 262163
      Local interface: lsi.1051136, Status: Up, Encapsulation: VPLS
        Description: Intf - vpls VPLS local site 3 remote site 1


MAC flags (S -static MAC, D -dynamic MAC,
           SE -Statistics enabled, NM -Non configured MAC)
Routing instance : VPLS
 Bridging domain : __VPLS__, VLAN : NA
   MAC                 MAC      Logical
   address             flags    interface 
   00:1f:16:2c:de:4f   D        lsi.1051136          
   00:d0:d0:a1:2e:92   D        lsi.1051136          
   00:d0:d0:a1:71:b0   D        lsi.1051136          
   64:16:8d:f6:f9:15   D        ge-1/1/0.2           


 

Thanks in advance

 FAS





 
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
http://clk.atdmt.com/GBL/go/201469226/direct/01/