[j-nsp] JUNOSe multi-topology IS-IS support?

[Mark Tinka]

On Saturday 06 March 2010 05:14:42 pm David Monosov wrote:

> Does anyone have any experiences (or ideas) to share on
>  the subject of elegantly integrating JUNOSe devices into
>  multi-topology IPv4 and IPv6 IS-IS domains without this
>  feature?

Have no experience with JUNOSe, but if the code is anything 
like the spec., ST- and MT-configured routers will have a 
hard time 'sync'ing up' on the same wire.

You either have ST both ways, or MT both ways (and I know 
not of any implementation which allows you to turn this off 
per-interface)

Surprised, though, that JUNOSe won't do MT.

Cheers,

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20100309/d230b0c6/attachment.bin>