[j-nsp] Verify loss priority for a forwarding class

meryem Z meryem_z at hotmail.com
Thu Mar 11 11:44:17 EST 2010


it seems a good idea , i will test it.

thank you.



> Date: Thu, 11 Mar 2010 07:14:31 -0500
> Subject: Re: [j-nsp] Verify loss priority for a forwarding class
> From: addy.mathur at gmail.com
> To: meryem_z at hotmail.com; david.roy at orange-ftgroup.com; juniper-nsp at puck.nether.net
> 
> Meryem:
> 
> Maybe try a firewall filter with a counter on the egress interface?
> Something like:
> 
> from forwarding-class <forwarding-class_name>
> from loss-priority high
> then count fc-blah_lp-high
> then accept
> 
> --Addy.
> 
> 
> On 3/11/10, meryem Z <meryem_z at hotmail.com> wrote:
> >
> > Hello David ,
> >
> > Thanks for your response, but this command is supported M320 routers and
> > T-series routing platforms only..
> > Is there any equivalent for M7i routers ?
> >
> >
> > Thank you.
> >
> >
> >> From: david.roy at orange-ftgroup.com
> >> To: meryem_z at hotmail.com
> >> CC: juniper-nsp at puck.nether.net
> >> Date: Wed, 10 Mar 2010 14:12:10 +0100
> >> Subject: RE: [j-nsp] Verify loss priority for a forwarding class
> >>
> >> Hi,
> >>
> >> You can view drops at the fabric level via the command :
> >>
> >>  show class-of-service fabric statistics
> >>
> >> David
> >>
> >>
> >>
> >>
> >> David Roy
> >> Orange France - RBCI IP Technical Assistance Center
> >> Tel.   +33(0)299876472
> >> Mob. +33(0)685522213
> >> Email. david.roy at orange-ftgroup.com
> >>
> >>
> >> -----Message d'origine-----
> >> De : juniper-nsp-bounces at puck.nether.net
> >> [mailto:juniper-nsp-bounces at puck.nether.net] De la part de meryem Z
> >> Envoyé : mercredi 10 mars 2010 13:17
> >> Cc : juniper-nsp at puck.nether.net
> >> Objet : [j-nsp] Verify loss priority for a forwarding class
> >>
> >>
> >> hello Community,
> >>
> >> I configured a forwarding class with high priority loss. Now I need to
> >> verify that the traffic sent under this forwarding class ( using a traffic
> >> generator) has a high priority loss. The "show interface queue " doesn't
> >> show this information. is there any other way to do it ?
> >>
> >> Thank you.
> >>
> >>
> >>  		 	   		
> >> _________________________________________________________________
> >> Votre messagerie et bien plus où que vous soyez. Passez à Windows Live
> >> Hotmail, c'est gratuit !
> >> https://signup.live.com/signup.aspx?id=60969
> >> _______________________________________________
> >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >>
> >> *********************************
> >> This message and any attachments (the "message") are confidential and
> >> intended solely for the addressees.
> >> Any unauthorised use or dissemination is prohibited.
> >> Messages are susceptible to alteration.
> >> France Telecom Group shall not be liable for the message if altered,
> >> changed or falsified.
> >> If you are not the intended addressee of this message, please cancel it
> >> immediately and inform the sender.
> >> ********************************
> >>
> >  		 	   		
> > _________________________________________________________________
> > Hotmail : une messagerie performante et gratuite avec une sécurité signée
> > Microsoft
> > https://signup.live.com/signup.aspx?id=60969
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> 
> -- 
> Sent from my mobile device
 		 	   		  
_________________________________________________________________
Hotmail : un service de messagerie gratuit, fiable et complet
https://signup.live.com/signup.aspx?id=60969


More information about the juniper-nsp mailing list