[j-nsp] Screen OS OSPF Area 0

[Stefan Fouant]

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of Abhi
> Sent: Thursday, March 11, 2010 3:44 AM
> To: Juniper Puck
> Subject: [j-nsp] Screen OS OSPF Area 0
> 
> Hi everybody
> need to know weather their is way i can disable the default created
> OSPF area 0 on the screen OS ISG1000 firewall after the OSPF is
> enabled, as i need all the interfaces of the firewall in same area x to
> which it belongs.
> 
> Also if i keep this area 0 as it is and dont assign any interface is
> that ok, and rest of the interfaces belong to Area X, should this work
> fine.
> 
> I have not work screen os box and we are currently deciding how this
> can be deployed in the upcoming network.

You can just configure new areas and add your interfaces to their respective
areas.  As long as you don't have any interfaces bound to Area 0 you will be
fine.  IIRC you can't delete this default created Area in ScreenOS.

HTHs.

Stefan Fouant, CISSP, JNCIE-M/T
www.shortestpathfirst.net
GPG Key ID: 0xB5E3803D