[j-nsp] (M7i RE5.0) memory usage

Alfred Schweder alf at all.de
Sun Mar 28 05:14:51 EDT 2010


Hello

> > and the system seems to swap, cause less memory. The reaction of the
> > cli has often a slow start which is likely for swapping ...
> > If I look deeper:
> > alf at M7i.ls> show task memory detail
> >     Dynamically allocated memory:  335396864      Maximum: 366436352
> >          Program data+BSS memory:    4349952      Maximum:   4349952
> >               Page data overhead:    2154496      Maximum:   2154496
> >              Page directory size:     360448      Maximum:    360448
> >                                   ----------
> >               Total bytes in use:  342261760 (55% of available memory)
> The first command is accurate for the entire system, the second is only 
> showing stats on some specific junos processes. You're definitely 
> (almost) out of memory, the 70M inactive + 14M free is available for 
> use, but you're clearly facing pressure since you've already swapped on 
> 79M of inactive pages.
> Run top from shell, hit o, and sort by "res" to see what else is 
> consuming memory on the box.

So I see in "task memory" was is going on inside the rpd and with
"sysem proc sum" I see the system over all ?

Im wondering, where I waste memory, cause there are many posts which state
that 512MB would be fine for 4 full tables. Ive only three and the 768MB are
full. 

Are there are some knobs to reduce the memory consumption like not to use
"softreconfiguration" at cisco boxes ?

last pid: 37745;  load averages:  0.01,  0.06,  0.07
68 processes:  1 running, 67 sleeping
CPU states: 16.3% user,  2.4% nice,  6.0% system,  0.8% interrupt, 74.5% idle
Mem: 509M Active, 56M Inact, 148M Wired, 24M Cache, 69M Buf, 4412K Free
Swap: 1536M Total, 118M Used, 1418M Free, 7% Inuse

  PID USERNAME  THR PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
 1219 root        1   4    0   408M   389M kqread 653:16  1.56% rpd
 1222 root        1 111   15 43100K 40116K select  12:52  0.59% sampled
 5188 root        1  96    0 34420K 13016K select   1:40  0.00% mgd
 5187 alf         1   8    0 15264K  9760K wait     5:00  0.00% cli
13189 root        1   4    0 29680K  8980K kqread  10:45  0.00% rpd
16931 root        1   4    0 29680K  8964K kqread   6:56  0.00% rpd
 1212 root        1   4    0 29444K  7848K kqread  10:29  0.00% rpd
 1235 root        1  96    0 22408K  7056K select 104:56  0.29% snmpd
 1234 root        1  96    0 14836K  6352K select  33:56  0.00% mib2d
 1174 root        1  96    0 43204K  6300K select  39.2H  1.17% chassisd
 6007 bg          1  96    0 15188K  4800K select   0:52  0.00% cli
 1821 alf         1  96    0 15200K  4684K select   0:52  0.00% cli
 1342 alf         1  96    0 15188K  4584K select   0:55  0.00% cli

-- 
Mit freundlichen Gruessen
Dipl. Ing. A. Schweder
Gutachten & Consulting
Mobil +49.177.2194627 (+49.160.97639300)



More information about the juniper-nsp mailing list