[j-nsp] Load Balance in VRF by Junos

[Stefan Fouant]

You need the following:

'set routing-option forwarding-table export load-balance'

and

'set policy-options policy-statement load-balance then load-balance per-packet'

Sorry for the top-post, I'm on my Blackberry.

HTHs.

Stefan Fouant
------Original Message------
From: Gabriel Farias
Sender: juniper-nsp-bounces at puck.nether.net
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Load Balance in VRF by Junos
Sent: Mar 31, 2010 4:23 PM

Hi members,


How to balance traffic between EBGP equipment Juniper M120 (PE) x Cisco 6509
(CE) Switch, which are connected via ethernet aggregated?



I used the setup below and did not work the Juniper continues with the
output unbalanced traffic.



configuration forwarding-options

load-balance {
    indexed-next-hop;
}
hash-key {
    family inet {
        layer-3;
        layer-4;
    }
}


Thanks,

Gabriel Farias
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


Sent from my Verizon Wireless BlackBerry