[j-nsp] Load Balance in VRF by Junos

[Stefan Fouant]

I'm sorry, your request is getting lost in translation.  Why don't you just show us your configs and do a 'show route x.x.x.x' and 'show route forwarding-table destination x.x.x.x' for the route you are trying to load-balance.

Thanks,

Stefan Fouant
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: Gabriel Farias <gabrielfarias03 at gmail.com>
Date: Wed, 31 Mar 2010 18:51:04 
To: <sfouant at shortestpathfirst.net>
Cc: <juniper-nsp-bounces at puck.nether.net>; <juniper-nsp at puck.nether.net>
Subject: Re: [j-nsp] Load Balance in VRF by Junos

I'm not using EBGP external type in PE (M120)

Reagards,
Gabriel Farias

2010/3/31 Stefan Fouant <sfouant at shortestpathfirst.net>

> Do you have multi-path enabled on your EBGP sessions?
>
> Stefan Fouant
>
> Sent from my Verizon Wireless BlackBerry
> ------------------------------
> *From: * Gabriel Farias <gabrielfarias03 at gmail.com>
> *Date: *Wed, 31 Mar 2010 18:32:18 -0300
> *To: *<sfouant at shortestpathfirst.net>
> *Cc: *<juniper-nsp-bounces at puck.nether.net>; <juniper-nsp at puck.nether.net>
> *Subject: *Re: [j-nsp] Load Balance in VRF by Junos
>
> I have a section between EBGP VRF PE x CE via two physical connections
> (aggregate ethernet) and see the traffic unbalanced because the Junos uses
> the default flow.
>
> I need the traffic between the PE x CE is symmetrically balanced way, the
> previous setting and did not work, and within the configuration
> routing-instance <name> not have all the options.
>
> Thanks
> Gabriel Farias
>
> 2010/3/31 Stefan Fouant <sfouant at shortestpathfirst.net>
>
>> You need the following:
>>
>> 'set routing-option forwarding-table export load-balance'
>>
>> and
>>
>> 'set policy-options policy-statement load-balance then load-balance
>> per-packet'
>>
>> Sorry for the top-post, I'm on my Blackberry.
>>
>> HTHs.
>>
>> Stefan Fouant
>> ------Original Message------
>> From: Gabriel Farias
>> Sender: juniper-nsp-bounces at puck.nether.net
>> To: juniper-nsp at puck.nether.net
>> Subject: [j-nsp] Load Balance in VRF by Junos
>> Sent: Mar 31, 2010 4:23 PM
>>
>> Hi members,
>>
>>
>> How to balance traffic between EBGP equipment Juniper M120 (PE) x Cisco
>> 6509
>> (CE) Switch, which are connected via ethernet aggregated?
>>
>>
>>
>> I used the setup below and did not work the Juniper continues with the
>> output unbalanced traffic.
>>
>>
>>
>> configuration forwarding-options
>>
>> load-balance {
>>    indexed-next-hop;
>> }
>> hash-key {
>>    family inet {
>>        layer-3;
>>        layer-4;
>>    }
>> }
>>
>>
>> Thanks,
>>
>> Gabriel Farias
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
>> Sent from my Verizon Wireless BlackBerry
>
>
>