[j-nsp] Immediate aging in EX-3200

[Emil Katzarski]

Hi,

There is no link flap. At the same interface I have about 1000 other
VLANS and about 5000 other MAC's and they don't flap. The problem
affects only a one or a few MAC's at a time.
I should double check for a bridging loop but I don't believe there is one.

I use Junos 10.1R1

Regards: Emil

On Sat, May 22, 2010 at 5:25 PM, Chuck Anderson <cra at wpi.edu> wrote:
> On Fri, May 21, 2010 at 06:13:42PM +0300, Emil Katzarski wrote:
>> I have a switch EX3200-48T with quite simple L2 config. Once in a
>> while I can see some MAC addresses learned on the correct interface
>> and VLAN, but then (less than a second later) the MAC is deleted.
>> I can also see  the "Immediate aging" counter increasing.
>
> Are you seeing link flaps or port errors?  Is it possible there is a
> bridging loop?  What JUNOS version are you running?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>