[j-nsp] IDP8200 Issue -

[Tim Eberhard]

You could always run trackip on the SRX to monitor the path to the  
switch. Pinging a L3 interface on the core switch itself.

Hope this helps

-Tim Eberhard

On May 26, 2010, at 6:27 AM, Fahad Khan <fahad.khan at gmail.com> wrote:

> Dear Folks,
>
> I am just shocked to know that IDP8200 does not support Peer Port  
> Modulation
> for 10 gig links.
>
> Does any one know, how can I failover my Firewall properly if the link
> between Core Switch and IDP is down
>
> the diagram is
>
>    SRX3600---HA-------SRX3600
>          |                          |
>     IDP8200                IDP8200
>          |                          |
>      ------Core -----Switch------
>
>
> Awaiting for quick response
>
> Muhammad Fahad Khan
> JNCIP - M/T # 834
> IT Specialist
> Global Technology Services, IBM
> fahad at pk.ibm.com
> +92-321-2370510
> +92-301-8247638
> Skype: fahad-ibm
> http://www.linkedin.com/in/muhammadfahadkhan
> http://fahad-internetworker.blogspot.com
> http://www.visualcv.com/g46ptnd
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp