[j-nsp] IDP8200 Issue -

[Scott T. Cameron]

set chassis cluster redundancy-group # ip-monitoring

As with all things, YMMV.


On Wed, May 26, 2010 at 7:40 AM, Tim Eberhard <xmin0s at gmail.com> wrote:

> You could always run trackip on the SRX to monitor the path to the switch.
> Pinging a L3 interface on the core switch itself.
>
> Hope this helps
>
> -Tim Eberhard
>
>
> On May 26, 2010, at 6:27 AM, Fahad Khan <fahad.khan at gmail.com> wrote:
>
>  Dear Folks,
>>
>> I am just shocked to know that IDP8200 does not support Peer Port
>> Modulation
>> for 10 gig links.
>>
>> Does any one know, how can I failover my Firewall properly if the link
>> between Core Switch and IDP is down
>>
>> the diagram is
>>
>>   SRX3600---HA-------SRX3600
>>         |                          |
>>    IDP8200                IDP8200
>>         |                          |
>>     ------Core -----Switch------
>>
>>
>> Awaiting for quick response
>>
>> Muhammad Fahad Khan
>> JNCIP - M/T # 834
>> IT Specialist
>> Global Technology Services, IBM
>> fahad at pk.ibm.com
>> +92-321-2370510
>> +92-301-8247638
>> Skype: fahad-ibm
>> http://www.linkedin.com/in/muhammadfahadkhan
>> http://fahad-internetworker.blogspot.com
>> http://www.visualcv.com/g46ptnd
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>