[j-nsp] no family inet6 for vlan.*-interfaces on 10.1R2.8?

[Johan Borch]

On Wed, May 26, 2010 at 11:55 AM, Menno Kortekaas <M.Kortekaas at dataman.nl>wrote:

> Maybe this is because ipv6 works in packet mode, but not really on a vlan
> interface...
> I've also placed an IPv6 address on my vlan interface and it is reachable
> through a family inet interface, but not through a family ethernet-switching
> interface.
>
> I think because something is not really really working, Juniper just hides
> the command.
> I've found another "hidden feature" today (JUNOS 10.0R3.10).
>
>
> # set interfaces ge-0/0/15 gigether-options ?
> Possible completions:
> > 802.3ad              IEEE 802.3ad
> + apply-groups         Groups from which to inherit configuration data
> + apply-groups-except  Don't inherit configuration data from these groups
> > auto-negotiation     Enable auto-negotiation
>  ignore-l3-incompletes  Ignore L3 incomplete errors
>  loopback             Enable loopback
> > mpls                 MPLS options
>  no-auto-negotiation  Disable auto-negotiation
>  no-loopback          Don't enable loopback
> > redundant-parent     Parent of this interface
>
> # set interfaces ge-0/0/15 gigether-options no-flow-control
>
> # commit check
> configuration check succeeds
>
>
> There should be IPv6 support in flow mode in JUNOS 10.2 but what I've
> heared is that 10.2 will not be released for the branch series.
>
> Menno
>
>
>

Where did you hear about 10.2 not being available to branch series? Any idea
when 10.2 is to arrive?

- Johan