[j-nsp] ERX310 PPPoE and multiple Virtual-ro​uters

[Diogo Montagner]

AFAIK, you need different subinterfaces for each virtual-router.

Eg.:

Vlan 10 - VR ABC
Vlan 20 - VR DEF
...

Rgs

On 11/2/10, Tom Teeuwen <tom at tomteeuwen.eu> wrote:
> Hello,
>
>
>
> I'm configuring an ERX310 for PPPoE termination.
>
> From the all DSLAM's we get about 190 tagged VLAN's.
>
> So for every VLAN i need to create a subinterface.
>
>
>
> Now we want to create multiple virtual-routers for customers who want to get
> an VPN.
>
> In the basic setup without VR's(only the default) i have a profile bounded
> to an subinterface.
>
> The profile config:
>
> profile Test
>  ip unnumbered gigabitEthernet 1/1.102
>  ppp authentication virtual-router default pap
>
>
>
> Now I created a VR and a domain-map and mapped a domain to the VR
>
> But the PPPoE request is comming from the same subinterface as above
> specified (where i attached a profile to the subinterface)
>
> Problem is that I only can attach one profile to a subinterface.
>
> I want the following:
>
> - based on a domain attach the PPPoE session to a specific VR
>
> - PPPoE request can come from different subinterfaces
>
>
>
> Example:
>
> Customer 1 form subif 1 to VR-A
>
> Customer 2 from subif 1 to VR-B
>
> Customer 3 from subif 2 to VR-A
>
> Customer 4 from subif 2 to VR-B
>
>
>
> Kind regards,
>
> Tom
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

-- 
Sent from my mobile device

./diogo -montagner