[j-nsp] Unable to display ARP table on M10i
minotaur at crete.org.ua
Wed Nov 17 07:33:48 EST 2010
On Fri, Nov 12, 2010 at 05:58:33PM +0200, Alexander Shikoff wrote:
> I'm unable to display ARP table on my M10i box with JunOS 9.5R1.8.
> minotaur at br1-gdr.ki> show arp no-resolve expiration-time
> ... and silence.
> The command is just hanging and there is no any output, but I'm still able
> to break it with Ctrl+C.
> What may be a reason of such behavior?
> Thanks in advance.
'clear arp' also hangs.
when 'clear arp' or 'show arp' are being executed "top" shows:
last pid: 35703; load averages: 1.02, 0.91, 0.60 up 34+17:03:02 14:31:12
62 processes: 2 running, 60 sleeping
CPU states: 22.9% user, 0.4% nice, 76.0% system, 0.8% interrupt, 0.0% idle
Mem: 472M Active, 96M Inact, 119M Wired, 49M Cache, 69M Buf, 1308K Free
Swap: 1536M Total, 4020K Used, 1532M Free
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
35700 root 1 122 0 2560K 1896K RUN 6:56 93.85% arp
Did anyone have such issue in the past?
More information about the juniper-nsp