[j-nsp] entering shell in E320 router and enable debugging

[Diogo Montagner]

Hi Marlon,

Usually the shell access is used only by JTAC.

You can use the log here to simulate "terminal monitor".

Rgs

On 11/28/10, Marlon Duksa <mduksa at gmail.com> wrote:
> Hi,
> Does anyone know how to enter the shell on E320?
> I read in one of the posts on this list that in order to enable  LAC and LNS
> in the same box on E320, a "pppLnsBylassLocalDomain' command needs to be
> entered in the shell mode. But it does not say how do you enter the shell
> mode.
>
> Furthermore  how do you enable and monitor L2TP sessions? The 'debug'
> command has a very limited options and there is nothing like 'configure
> monitor' on Cisco to display the debug output on the screen?
>
> Thanks,
> Marlon
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

-- 
Sent from my mobile device

./diogo -montagner