[j-nsp] some questions about junipter router and firewall

Deric Kwok deric.kwok2000 at gmail.com
Mon Nov 29 14:53:13 EST 2010

Thanks for all reply

1/ for the | no-more
It seems it is not working

get config | no-more
                                    ^---------unknown keyword no-more

2/ How can I increase the line in putty? I can't find it in the setting

3/ How can I enable http in router?

4/ Any command can show the firewall status?
I only know that ipfw -a list in freebsd

Thank you

On Mon, Nov 29, 2010 at 11:55 AM, Justin M. Streiner
<streiner at cluebyfour.org> wrote:
> On Mon, 29 Nov 2010, Deric Kwok wrote:
>> I have some questions about junipter router and firewall
>> 1/ Where is the location of the router config file?
>> I would like to copy it from remote site when http is not enabled
> On devices running JUNOS, you should be able to SCP/SFTP into the router and
> get the config file (/config/juniper.conf.gz).
> I don't have any Juniper firewalls, so I can't answer that.
>> 2/ How can I be backward when I type wrong?
> I don't understand what you mean here.  JUNOS parses your command as you
> type it, so if you enter comething incorrect, it's not at all shy about
> letting you know something is wrong :)
>> 3/ I use the putty to logon to get config. but it won't be good as
>> there is many more in screen. How can I remove it?
> "show configuration | no-more" will do what you want.
> jms

More information about the juniper-nsp mailing list