[j-nsp] SRX and multihome gateway

[Spunk Meyer]

Hi bizza,

Please check this link:
http://www.juniper.net/us/en/community/junos/script-automation/library/event/enable-primary-nexthop/

You might need to edit the script to fit in your needs.



On Mon, Oct 18, 2010 at 8:41 PM, bizza <bizzam at gmail.com> wrote:

> Hi all,
> i'm trying to configure 2 isps on juniper srx210.
> I started using the KB 15545 (juniper.net account required,
> http://kb.juniper.net/KB15545).
> Failover between the 2 isps works fine, but only if I unplug the cable
> that connect srx and one router.
> The next step is automatic failover when atm goes offline in primary
> router.
> I tried to look for a solution, and i found 2 possibilities:
> -
> http://forums.juniper.net/t5/Routing/Multiple-static-routes-test-next-hop/td-p/47513
> -
> http://www.juniper.net/us/en/community/junos/script-automation/library/event/track-ip/
>
> The first don't work in my configuration, and the second one appear
> (to me) more powerful, but i'm not able to make it works.
>
> In /var/log/escript.log file i found
> Oct 18 13:38:05 inspecting event output 'track-ip.slax'
> Oct 18 13:38:05 finished event script 'track-ip.slax'
> Oct 18 13:38:05 event script processing ends
>
> and i suppose it means that scripts are in correct path and system can
> execute it, but the failover still work only if i unplug one cable.
>
> any suggestions?
>
> regards
> Marco
> --
> bizza
> http://www.rm-rf.eu/
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Best Regards,

Wilson Sihombing