[j-nsp] Why family Ethernet Switching under unit 0

[Ramesh]

This is by design. Since having more than one unit's would not make sense on
family ethernet switching, one special unit had to be defined. So I guess
they went with 0. On family inet, there can be many more than one units.

On Tue, Oct 19, 2010 at 2:58 PM, Muhammad Rehan <rehanrehman45 at gmail.com>wrote:

> Hi Team,
>
> I have a simple query,why family ethernet switching is always required to
> configure under " unit 0 " , why we are not able to use unit other than
> unit
> 0.
>
> Regards
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>