[j-nsp] Why family Ethernet Switching under unit 0

[Ramesh]

I correct myself, there can be many units on a physical interface with inet
defined.

On Tue, Oct 19, 2010 at 6:49 PM, Ramesh <rameshbmsu at gmail.com> wrote:

> This is by design. Since having more than one unit's would not make sense
> on family ethernet switching, one special unit had to be defined. So I guess
> they went with 0. On family inet, there can be many more than one units.
>
>
> On Tue, Oct 19, 2010 at 2:58 PM, Muhammad Rehan <rehanrehman45 at gmail.com>wrote:
>
>> Hi Team,
>>
>> I have a simple query,why family ethernet switching is always required to
>> configure under " unit 0 " , why we are not able to use unit other than
>> unit
>> 0.
>>
>> Regards
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>