[j-nsp] m10 Hard Disk Crashed

[Kevin Loch]

FTA:

"Note: You need to jumper the SSD to CS (cable select)"

I thought I had to set the drive jumper to Slave (not
CS) to get a replacement drive to work.  But that was
over a year ago so my memory is fuzzy.

- Kevin

Jonas Frey (Probe Networks) wrote:
> See cluepon:
> 
> http://juniper.cluepon.net/index.php/Replacing_the_harddisk_with_solid_state_flash
> 
> Am Mittwoch, den 20.10.2010, 17:19 -0400 schrieb Fernando Atilano:
>> Anybody that can provide as to how to replace a m10 hard disk? one of them failed.
>>
>> any feedback is greatly appreciated.
>>
>> Fernando Atilano| Transtelco| Networking & Support
>> MX 52.656.257.1114
>> US    1.915.217.2286
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp