[j-nsp] Fwd: router recommendation

[Julien Goodwin]

On 26/10/10 08:54, Gabriel Blanchard wrote:
> We in fact use a J-6350 at our office and we couldn't even get it to handle a full routing table. (at least not very well).

They handle a full routing table just fine. With the old packet-mode
software they could do a full table (as of January) in 1g of ram.

With flow-mode I've had to up ours to 3GB (above Juniper spec) at which
point they handle three full tables with plenty to spare.

-- 
Julien Goodwin
Studio442
"Blue Sky Solutioneering"