[j-nsp] WAN-PHY or STM-64 direct

[William Jackson]

We are debating which is the better route to go.

 

We already have STM-64/Ethernet capable ADM's and we were considering
which would be the best option?

 

1.	Terminate the STM-64 circuits into our MX boxes using type 3
FPC's.
2.	Use a 10Gig WAN-PHY setup on the MX on an Ethernet line card and
plug into an STM-64 interface on the ADM?

 

Anyone got any experience with WAN-PHY setup and
recommendations/caveats?

 

Will be running MPLS/IPv4/IPv6 over it

 

thanks