[j-nsp] WAN-PHY or STM-64 direct

[Jared Mauch]

Since you control the entire ecosystem, I would recommend the lower port cost of the 10ge interface. 

Sent from my iThing

On Oct 27, 2010, at 6:07 AM, "William Jackson" <wjackson at sapphire.gi> wrote:

> We are debating which is the better route to go.
> 
> 
> 
> We already have STM-64/Ethernet capable ADM's and we were considering
> which would be the best option?
> 
> 
> 
> 1.    Terminate the STM-64 circuits into our MX boxes using type 3
> FPC's.
> 2.    Use a 10Gig WAN-PHY setup on the MX on an Ethernet line card and
> plug into an STM-64 interface on the ADM?
> 
> 
> 
> Anyone got any experience with WAN-PHY setup and
> recommendations/caveats?
> 
> 
> 
> Will be running MPLS/IPv4/IPv6 over it
> 
> 
> 
> thanks
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp