[j-nsp] JM7i logical systems

[Nilesh Khambal]

I would suggest opening a case with JTAC to troubleshoot further. This is
not an expected behavior. Please attach the CLI and messages logs from both
the attempt to configure LRs. Also, provide RSI output.

Thanks,


On 10/27/10 8:34 AM, "Vladislav Vasilev" <vvasilev at vvasilev.net> wrote:

> I've got two M7i's that I use as border routers. I had to configure a
> logical system today on one of them and I encountered a strange
> problem. The commit command took longer than usually and 3 of 3 BGP
> sessions went down. I decided to do the same on the other M7i and I
> encountered the same problem. All I did on the second one was:
> 
> xxx at xxx-br2# set logical-systems LS1
> xxx at xxx-br2# commit
> 
> User CPU utilization was 92% right after the commit.
> 
> Both routers are running JunOS 10.3R1.9.
> 
> Have any of you encountered a similar problem?
> 
> Thank you!
> 
> Regards,
> V.Vasilev
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp