[j-nsp] Dynamic DB

[Pavel Lunin]

Richard,

I knew you should tried it :) Thank you.
More and more signs that there is no many implementations but a lot of
skepticism around it.

2010/10/28 Richard A Steenbergen <ras at e-gerbil.net>

> On Wed, Oct 27, 2010 at 11:25:27PM +0400, Pavel Lunin wrote:
> > Hi,
> >
> > Anyone here uses dynamic-db? Works? or as always? :)
>
> I tried, but there is no support for it via Netconf, which pretty much
> makes it a non-starter for me. :) I'm sure something else about it is
> broken too, I just never got that far.
>
> The only other thing I noticed from the 30 seconds I played with it was
> that there is no way to abandon a candidate config when in dynamic-db
> mode. So if you change ANYTHING and want to not apply those changes, the
> only way to quit out and not leave the session stuck open with
> uncommitted changes is to manually undo the changes you made and commit
> the blank config. With failure to plan or test features like that, I'm
> sure it only gets worse from there. :P
>
> --
> Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
> GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
>