[j-nsp] Help with DHCP relay issues on J2350 running 9.6 code

[Baidoo, Joe]

Thanks, Will.
I had the host-inbound-traffic system-services dhcp configured but I still cannot get the clients to receive an IP address from the dhcp server.
Regards,
Joe 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Will McLendon
Sent: 01 September 2010 00:39
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Help with DHCP relay issues on J2350 running 9.6 code

Make sure you have DHCP as an allowed service on the reth interface in the Zone configuration:

set security zones security-zone <zone> interfaces reth0.0 host-inbound-traffic system-services dhcp

I think that will do the trick.

good luck,

Will McLendon

On Aug 31, 2010, at 3:24 PM, juniper-nsp-request at puck.nether.net wrote:

> Help with DHCP relay issues on J2350 running 9.6 code
Hi,

I recently migrated from Cisco ASA firewall to Junos 9.6 on J2350 series but I cannot get DHCP relay to work with the DHCP clients sitting behind the firewall. My configs below:

set forwarding-options helpers bootp relay-agent-option
set forwarding-options helpers bootp interface reth0.0 server x.x.x.x
set forwarding-options helpers bootp interface reth0.0 server x.x.x.x

Any ideas?
Many thanks,
Regards,
Joe
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp