[j-nsp] Inter-Area MPLS TE

[Patrick Okui]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


On 7 Sep, 2010, at 3:01 PM, Eric Van Tol wrote:
>
> My question was more about going from one ISIS area to another (say,  
> 49.0001 to 49.0002), but this information could help me out as well.

LSPs in ISIS are limited in flooding scope by Level not by area. If  
you are talking different areas in L2 then it should just work.

If you're talking different areas connected by only L1 routers (which  
is not recommended) giving one of the L1 routers a NET address in both  
areas should allow both L1 areas to have the same LSPs (and hence link  
state database).

- --
patrick 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (Darwin)

iEYEARECAAYFAkyGTn4ACgkQ+wrazll+97w7JgCfZXi8gKHJc75Gsnli/ypp9d37
38sAn1OfrvO5jWwtANrruPPV874WqIex
=qKcz
-----END PGP SIGNATURE-----