[j-nsp] GRE on MX platform without Multiservices DPC?

[Devangnp]

You can configure tunnel services under chassis fpc pic...

Devang Patel
(Sent from my iPhone)

On Sep 8, 2010, at 6:24 PM, Chris Evans <chrisccnpspam2 at gmail.com> wrote:

> Can't remember the syntax as I'm on my phone. But do.'set chassis fpc (line
> card number)'   Its a command under there.
> 
> Hth
> 
> Chris
>> Does anyone know how to configure a GRE tunnel on the MX platform withOUT
>> a Multiservices DPC?
>> 
>> I *thought* that you can somehow "steal" resources from a line card to
>> create a GRE tunnel on the MX, but I have not found an example of how to
>> do that. I do not need much bandwidth, so the Multiservices DPC is just
>> overkill for this application.
>> 
>> I can create a "gr" interface in the config, but after commiting the
>> config the "gr" interface does not show up:
>> 
>> [edit interface gr-1/0/1]
>> 
>> unit 0 {
>> tunnel {
>> source 192.168.0.1;
>> destination 192.168.1.1;;
>> }
>> family inet {
>> address 10.0.0.1/30;
>> }
>> }
>> 
>> 
>>> show interfaces gr-1/0/1
>> error: device gr-1/0/1 not found
>> 
>> I know that you can build a "logical tunnel" to create connections within
>> a router, but I need a GRE tunnel to connect to an external router. Are
>> the methods similar?
>> 
>> Any ideas?
>> 
>> Clarke Morledge
>> College of William and Mary
>> Information Technology - Network Engineering
>> Jones Hall (Room 18)
>> Williamsburg VA 23187
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp