[j-nsp] Stuck access-internal route

[sthaug at nethelp.no]

> I've come across a situation on an MX where an access-internal route
> is "stuck". I was hoping someone had an idea on how to clear it - my
> best bet so far is rebooting. I've tried clearing dhcp relay binding,
> but that's not possible as the entry is already out of the DB.

You might clear them by restarting rpd. That's going to be lower impact
than restarting the whole box - but it's still going to flap protocol
adjacencies/sessions and *will* result in some downtime.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no