[j-nsp] IPv6 on LAG Bundles - Juniper E-Series

[Cheikh-Moussa, Ahmad]

Hi Callum,

currently IPv6 on LAG is not supported. 12.1.0 should have this feature and
the last information I have is that this will be released in the middle of 2011.

Regards,
 Ahmad



> -----Ursprüngliche Nachricht-----
> Von: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] Im Auftrag von Callum Barr
> Gesendet: Dienstag, 14. September 2010 03:41
> An: juniper-nsp at puck.nether.net
> Betreff: [j-nsp] IPv6 on LAG Bundles - Juniper E-Series
> 
> Hi All,
> 
> 
> 
> Do any of you know if it is possible to run IPv6 over a LAG bundle on an E320?
> 
> 
> 
> Whenever I try to configure anything to do with IPv6 on a lag interface I get
> the following;
> 
> 
> 
> t-rex:lab(config-if)#ipv6 address xxxx:xxxx:dead:beef::1/64
> 
> % lower layer bind failed
> 
> 
> 
> Is this expected behavior?  It seems rather retarded if v6 isnt supported on a
> lag bundle, but it is supported on pretty much every other interface under the
> sun.
> 
> 
> 
> Cheers,
> 
> 
> 
> Callum Barr
> 
> Network Engineer
> 
> worldxChange Communications
> 
> 
> 
> @: cbarr at wxc.co.nz
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


Sitz der NK Networks & Services GmbH: Von-der-Wettern-Straße 15, 51149 Köln
Registergericht: Amtsgericht Köln, Registernummer HRB 30805
Geschäftsführer: Tonis Rüsche, Bernard Latour