[j-nsp] Multiple ospf process on juniper EX

Felix Schueren felix.schueren at hosteurope.de
Tue Sep 14 08:01:16 EDT 2010


Henri Khou wrote:
> Hello,
> 
> I'm trying to find the best way to redistribute BGP default route to 2
> independant organizations running OSPF with a different cost for each
> organization.
> I am used to Cisco IOS where you can run 2 OSPF instance by specifying a
> process ID for every OSPF instance.
> How can I do that under JunoS?
> 
basically, you can't. You'll have to create routing instances & figure
out a way to redistribute the routing information using rib groups and
most likely "next-table statics". It's probably easier to redesign it in
some way, maybe you can use plain BGP?

Kind regards,

Felix


-- 
Felix Schüren
Head of Network

-----------------------------------------------------------------------
Host Europe GmbH - http://www.hosteurope.de
Welserstraße 14 - 51149 Köln - Germany
Telefon: 0800 467 8387 - Fax: +49 180 5 66 3233 (*)
HRB 28495 Amtsgericht Köln - USt-IdNr.: DE187370678
Geschäftsführer:
Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller

(*) 0,14 EUR/Min. aus dem dt. Festnetz; maximal 0,42 EUR/Min. aus
den dt. Mobilfunknetzen




More information about the juniper-nsp mailing list