[j-nsp] Multiple ospf process on juniper EX

[Diogo Montagner]

You can also try to use multi-topology.

Rgs

On 9/14/10, Felix Schueren <felix.schueren at hosteurope.de> wrote:
> Henri Khou wrote:
>> Hello,
>>
>> I'm trying to find the best way to redistribute BGP default route to 2
>> independant organizations running OSPF with a different cost for each
>> organization.
>> I am used to Cisco IOS where you can run 2 OSPF instance by specifying a
>> process ID for every OSPF instance.
>> How can I do that under JunoS?
>>
> basically, you can't. You'll have to create routing instances & figure
> out a way to redistribute the routing information using rib groups and
> most likely "next-table statics". It's probably easier to redesign it in
> some way, maybe you can use plain BGP?
>
> Kind regards,
>
> Felix
>
>
> --
> Felix Schüren
> Head of Network
>
> -----------------------------------------------------------------------
> Host Europe GmbH - http://www.hosteurope.de
> Welserstraße 14 - 51149 Köln - Germany
> Telefon: 0800 467 8387 - Fax: +49 180 5 66 3233 (*)
> HRB 28495 Amtsgericht Köln - USt-IdNr.: DE187370678
> Geschäftsführer:
> Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller
>
> (*) 0,14 EUR/Min. aus dem dt. Festnetz; maximal 0,42 EUR/Min. aus
> den dt. Mobilfunknetzen
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

-- 
Sent from my mobile device

./diogo -montagner